TERAMİX-B ıs a cement based, fiber reinforced,water repellent vapor diffusible dry decorative top coat obtained by special additives ,color:can be produced in light colors.White color coating and after drying painting to desired color is recommanded .

Packed in 25 kg bags

Sound ,fine plastered surfaces of external facades of buildings,especially humid areas ,like see side .As well as decorative top coat for CEMMİX complete heat insulated buildings.

2.5-3.0 kg/m² for 2 mm thick coating
3.0-4 kg/m² for 3 mm thick coating

Should be protected from humidity.Not to be stored
More than 10 bags . Shelf life is 6 months

Subsurface should be free from material preventing adhesion ,such as dust ,dirt and oil.
Cracks and holes should be repaired by REPAMİX –M(repair putty)
Fine finishing is made by using WOLMİX (levelling putty). Each layer should be left to dry .Primer LATEX-PM –S or LATEX-PS is applied prior to TERAMİX-B and left to dry at least 6 hours.


All kind of subbase should be primed by LATEX-PM and left to dry minimum 6 hours.
TERAMİX-B ıs applied by steel trowel right.After decorative effect ıs formed round , horizontal or vertical movements of plastic trowel .
Temperature should not drop below 5 °C following 24 hours.
Touch dry:1-2 hours at 21 ° C.Final dry: 24 hours.
Tools should be washed with clean water after using.
It is not applied to horizantal and sloped areas more then 45 %.
Strong windy and very hot days , under direct sun light, care should be paid to moisture adtustments.great surfaces should be protected from cold joints by seperation bandages.


TECHNICAL CHARACTERISTICS :

• STRIPPING RESISTANCE :Dry >2.5 kgf
Wet_Dry >2 kgf
Frost _ Thaw >2 kgf

• WATER ABSORBTION :< 0.5 kg/cm ²h 0.5
• PH : 8_9
• VAPOUR DIFUSION : 0.5 m ־¹
REFERRED STANDARD : TS 7847