Spreymix-B is cement and acrylic pulver based decorative top coat material. It is water perpellent, water vapor diffusibla decorative pulver typ ready. Mixed thin coat plaster. Light colars are produced. White color is recommanded.

SPREYTER-M IS PACKED IN 25 KG BAGS.

Spreymix-B is used for external decorative coatings of plastered walls of the buldings on sea side and humid areas. Applied as coating of tekas complete heat in solation systems as well. It is suitable for decorative covering of slight ırregularities fo Brown coat plastered surfaces.

Fine texture 1,5-2.50 kg/m2 coarse texture 2.50-4.00 kg/m2

Must be protected from humidty and external effects. Avoid storing more than 10 rows. Shelf life is 6 months.

Surface should be free from oil, dirt dust and loose particles. Defected surfaces and crachs should be repaired by tekspan-m (concrete repair putty). Left to dry and primed by tekastar-s or tekaslak. Spreymix-B in pulver form is poured in clean water gradually and mixed with low speed mixer (max.400 rpm). Left to rest for 15 minutes. Mix again until reachine to required consistancy. Windows and door framses, glasses, surfaces unwanted to cover should be masked before application mixture is spreyed by special sprey gun. Mix should not be used within 2 hours. Consistancy of mix should be the same to avoid discoloration. Care should be paid to contanlity of wide areas to achieve same texture.

Avoid application under direct sun light, strong wind, high humidty and heavy rain, in case of discontinutiy of coating, surfaces should be subdivided by regular joints. In hot days surfaces should be wetted at least fallowing tree days. Surface dries in 24 hours at 210 c and 65 % humidty. Tools should be washed with clean water.