Construction Chemicals Products & Insulation System Joint Stock Co

 
 
 
 
 
 

LAST COAT OVER INSULATION

 

 
   MIXSTONE (M-550) Scratch dry plaster
 

DESCRIPTION

Mixstone is water repellent, vapor diffusable mineral based decorative coating. Produced in 24 colors. It has mozaic plaster appearance.

PACKING:

Mixstone is in 25 kg bags.

SUBSURFACE PREPARATION

Mixstone is applied as fine coat plaster on Brown coat laye as colored decorative plaster both internal and externallly.

CONSUMPTION

On top of fine coat plaster 7-8 mm thick application 15 kg/m2
On top of brown coat plaster 7-8 mm thick application 18-20 kg/m2

STORAGE

should be projected from external effects, especially humidty and stored maximum 10 rows. Shelf life is 6 months.

APPLICATION

Surface should be free from oil, dirt, dust, Mixstone is poured gradually in to water and mixed with low sped mixer ( max 400 RPM). Leave to rest 15 minutes, mix again, surface to be plastered must be wetted before application 7-8 mm wooden gunding strips are fixed on surface. Mortar is applied and leveled. After a while, before setting of mortar surface is gradu
Scratced by means of special comb. Loose partica are remove by a soft brush. Surface should be wetted 2-3 days mortar should be used within next 2 hours. Hardener mortar must not be wetted and used again. During application surface should be divided by joints. Mixing time and quantity of water should be not be changed to avoid formation of color changes. In large spaces applica ters avoid application under direct sunlight, strong wind, high relative moistore and heavy rain. Tools must be cleaned by water. Never add any other material.
 

 
 

All Rights Reserved.© Cemmix Construction Chemicals Products & Insulation System Joint Stock Company

About Us | Products | Heat Insulation | Decorative Profiles | References | ceMMix Machinery | Contact Us | Türkçe | Russian