LATEK-PM-PL water based acrylic surface strengtener. By applying LATEK-PM-PL to surfaces to be painted or plastered hair cracks are filled and a foundation is formed.
LATEK-PM-PL provides good adhesion of paint or plaster to the subsurface. It is resistant to discharge of water wapor and makes the surface water repellent. Unprimed absorptive surfaces (paint or plater) hair cracks sucks the water of the paint and leaves the rest on surface as a seperate film. Unadhered film reels out by time.

Tekastar is water based acrylic bonding agent without filler and is applied before of after paint and plaster application.If it is used before plaster or paint priming is not necessary. Tekaslak provides good adhesion between tekvol-m and tekont-sk applied subbaces and final top coals. Bonding agent in tekaslak prevent water loss and reduces consumption of excesive paint provides economy.

25 KG TIN OR PLASTIC BUCKETS

Tekastar- s is applied on concrete, plaster, asbestos sheet, blockwall, ytong, by brush or roller. Tekastar is applied on cement based levelling putty, concrete, thin coat plaster, stain sypsum plaster and gypsum wall panels.

On each layer 0,150-0,25 kg/m2 for tekstar-s and tekaslar.

In unopened buckets shelf life is 1 year. Protekt from frost.

Oil,dirt, dust and loose particles should be removed before application on absorptive surfaces tekaslak or tekastar-s diluted up to 1/1 by adding water to provide good penetration. So a good subbace is formed. Prime is applied by roller or brusj. All layers should be left to dry. Before next layer