Jasmine (semimat internal paint) is water and pure acrylıc based, semimat, protective internal satin paint. Dosen’t smell like oilbased satin paints. Dosen’t have solvents which are harmfull to health and envirement. Jasmine can be cleaned. More diffusible to water vapor and elastic compared with alkid based internal paint. Produced in different colors.

Jasmine is packed in 20 kg tin or plastic buckets.

Jasmine is applied on internal subbases comleted with satin gypsum, levelling putty, and primed surfaces, and anticorrosive coated metals such as heaters and pipes, Having silky appearance it is complementary of internal decoration for hotels, hospitals, restaurants, clubs, offices, shools, playing romms, etc.

0.400 kg/m²Jasmine is consumed in two layer application.

In unopened buckets at +5˚C shelf life is 1 year, should be protected from humidity and frost.

To obtain best satin texture effect surface should be primed sanded. Dry and clean. Jasmine is be applied on concrete, thin coat plaster, gypsum plaster, levelled surfaces and gypsum wall panels. İnternal block walls are levelled By wolmix Later Akmatek acrylic putty is applied. Left to dry. After sanding latex pm is applied. After 24 hours drying, 2 lap Jasmine is applied with 5 hours interval. If reqvired %5 water can be added. Roller or brush should be used in same direction. Jasmine should not be applied below 6˚C. Tools should be cleaned with water.

TECHNICAL CHARACTERISTICS:
* Alcali resistance : Meets TS 4320, 4323 and TS 43
* Water resistance : Meets TS 4320, 4323 and TS 4317
* Resistanceto rubbing : Meets TS 4970
* Covering : Meets TS 4315
* Ph : 8-9
* Reference standarts : Meets TS 5808